| Model | FL-C001 | |||
| Type | Plastic type | |||
| Measurement range | 200 to 2,000 mm 7.87″ to 78.74″ | |||
| Specific conductive capacity of measurable media | 3 or more*1 | |||
| Resolution | 1 mm 0.04″*2 | |||
| Linearity | ±3 mm ±0.12″*2 | |||
| Temperature characteristics | 0.1 mm/°C | |||
| Undetectable area | In the case of water | Top side | 25 mm 0.98″ | |
| Bottom side | 33 mm 1.30″ max.*3 | |||
| In the case of oil | Top side | 25 mm 0.98″ | ||
| Bottom side | 53 mm 2.09″ max.*3 | |||
| Judgment output response time | 0.4 s minimum | |||
| Probe horizontal torque | 6 N m | |||
| Tank pressure | -0.1 to +0.1 Mpa | |||
| Connection port | G3/4 on the dedicated probe side | |||
| Control output | Judgment output/alarm output | NPN/PNP open collector (selectable), 30 VDC max., 50 mA max. for eachResidual voltage: 2 V max. for NPN, 2.5 V max. for PNP, N.O./N.C. switchable | ||
| Analog output | 4 to 20 mA, maximum load resistance: 350 Ω (Response time: 0.1 s after comparator output determined [90 % response])Ripple when target remains stationary (P-P) 2 % of F.S. max. | |||
| Network compatibility | IO-Link*4 | |||
| Analog output accuracy | Resolution | 1 mm 0.04″ | ||
| Zero accuracy | ±0.1 mA (Zero point = 4 mA) | |||
| Full scale accuracy | ±0.2 mA (full scale = 20 mA) | |||
| Applicable cable | 8-pin M12 connector | |||
| Rating | Power voltage | 10 to 30 VDC, ripple (P-P) 10% included, Class 2 or LPS | ||
| Current consumption | 300 mA max. (at 10 V)/120 mA max. (at 30 V) (excluding load) | |||
| Environmental resistance | Enclosure rating | IP67 | ||
| Ambient temperature | -10 to +60 °C 14 to 140 °F | |||
| Relative humidity | 35 to 85 % RH (No condensation) | |||
| Operating medium temperature | -10 to +110 °C 14 to 230 °F | |||
| Vibration resistance | 10 to 55 Hz, 0.75 mm 0.03″ double amplitude in X, Y and Z directions, 2 hours respectively | |||
| Shock resistance | 300 m/s2 in 6 directions, 3 times respectively | |||
| Material | Liquid end materials | Sheath: PFAProbe: SUS304(do not connect this directly) | ||
| Case | Plastic section of the housing: PPS, PPSU, FKM, PVCCable connector: Ni-plated brass | |||
| Weight | 380 g | |||
| *1 These values were measured at the position of 100 mm 3.94″ or less from the wall of a metal tank. Contact KEYENCE for the case of a plastic tank.*2 These values were measured under the following conditions.Medium: Water, Tank material: Metal, Linearity range: Between 6 cm 2.36″ from the top and 1 cm 0.39″ from the bottom, Average time: 4 s*3 For the sanitary/plastic types, the undetectable area from the bottom end varies depending on the length of the probe.*4 Compatible with IO-Link Specification V1.1/COM 2 (38.4 kbps). | ||||
Bộ khuếch đại cảm biến mức Keyence FL-C001
Amplifier Unit, Resin Specification
SKU: FL-C001
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: CO/CQ, hóa đơn VAT
Thông tin bổ sung
| Thương hiệu | |
|---|---|
| Thời gian bảo hành | 1 Năm |
| Series |
Có thể bạn thích…
Khu vực Miền Nam
Call: 03826 777 45 / Chat Zalo
Khu vực Miền Bắc
Call: 0383 167 778 / Chat Zalo
Khu vực Miền Trung
Call: 0388 895 669 / Chat Zalo
Dịch vụ kỹ thuật/Bảo hành
Call: 0348 957 778 / Chat Zalo
