Module Keyence KL-DC1A

Module Keyence KL-DC1A

Khối ngõ vào dòng điện DC
SKU: KL-DC1A
Hãng sản xuất: Keyence
Chất lượng: Mới 100%
Bảo hành: Chính hãng
Chứng từ: hóa đơn VAT

Dịch vụ kèm theo:
✓ Lập trình & Sửa chữa PLC Keyence theo yêu cầu
✓ Lắp đặt & vận hành tận nơi
✓ Hỗ trợ kỹ thuật trọn đời
cam kết bán hàng giá tốt
Báo giá
Mã: KL-DC1A Danh mục: ,
ModelKL-DC1A
Measurement typeDC current
Power voltage24 VDC ± 10%, Class 2
Operating ambient temperature0 to +50°C (no freezing)
Operating ambient humidity35 to 85%RH (no condensation)
Ambient temperature for storage-20 to +70°C
Operating environmentMinimal amount of dust and corrosive gas present
Measurement category–
Wire temperature rating+70°C or more
Noise immunity1,500 Vp-p or more, pulse width: 1 µs, 50 ns (by way of a noise simulator), conforms to IEC standards (IEC 61000-4-2/-3/-4/-6)
Withstand voltage1,500 VAC for 1 minute (between the power supply terminal and each terminal and between all the terminals and the case)
Insulation resistance100 MΩ or more (tested with a 500 VDC megger, between the power supply terminal and each I/O terminal and between all the terminals and the case)
Internal current consumption (excluding current for driving input circuits)170mA or less
Shock resistanceConforms to JIS B 3502 and IEC 61131-2, 147 m/s², operating time: 11 ms, 3 times in each of the 3 directions
Pollution degree2
Intermittent vibration frequency (10 to 57 Hz)Amplitude: 0.075 mm
Intermittent vibration frequency (57 to 150 Hz)Acceleration: 9.8 m/s²
Continuous vibration frequency (10 to 57 Hz)Amplitude: 0.035 mm
Continuous vibration frequency (57 to 150 Hz)Acceleration: 4.9 m/s²
Weightapprox 350g
Number of channels1CH
Number of ranges5 (Range 1 and range 2 are shared among the terminals.)
Range switchingSetting: Use the setting switch. Connection: The connection terminal varies depending on the range.
Input methodSingle-ended
Sampling rateNormal mode: 1 ms (1,000 times/sec.), high-precision mode: 100 ms (10 times/sec.)
Input rangeRange 1: 0 to 20 mA, range 2: ±10 mA, range 3: ±100 mA, range 4: ±1 A, range 5: ±10 A
Displayable range (Range 1)-1.00 to 21.00mA
Displayable range (Range 2)-10.999 to 10.999mA
Displayable range (Range 3)-100.99 to 100.99mA
Displayable range (Range 4)-1099.9 to 1099.9mA
Displayable range (Range 5)-10.999 to 10.999A
Normal resolution (Range 1)10 µA (0.01 mA; 1/2000)
Normal resolution (Range 2)1 µA (0.001 mA; 1/20000)
Normal resolution (Range 3)10 µA (0.01 mA; 1/20000)
Normal resolution (Range 4)100 µA (0.1 mA; 1/20000)
Normal resolution (Range 5)1mA (1/20000)
High accuracy resolution (Range 1)0.1 µA (1/200000)
High accuracy resolution (Range 2)0.1 µA (1/200000)
High accuracy resolution (Range 3)1 µA (0.001 mA; 1/200000)
High accuracy resolution (Range 4)10 µA (0.01 mA; 1/200000)
High accuracy resolution (Range 5)0.1mA (1/200000)
Input impedance (Range 1)10 Ω
Input impedance (Range 2)10 Ω
Input impedance (Range 3)1 Ω
Input impedance (Range 4)0.1 Ω
Input impedance (Range 5)10 MΩ
Absolute maximum input current (Range 1)±100 mA
Absolute maximum input current (Range 2)±100 mA
Absolute maximum input current (Range 3)±500 mA
Absolute maximum input current (Range 4)±3 A
Absolute maximum input current (Range 5)±12 A
Measurement accuracy (25 ±5°C) Range 1±0.2% of F.S. ± 1 digit
Measurement accuracy (25 ±5°C) Range 2±0.2% of F.S. ± 1 digit
Measurement accuracy (25 ±5°C) Range 3±0.2% of F.S. ± 1 digit
Measurement accuracy (25 ±5°C) Range 4±0.3% of F.S. ± 1 digit
Measurement accuracy (25 ±5°C) Range 5±0.5% of F.S. ± 1 digit
Measurement accuracy (0 to 50°C) Range 1±0.6% of F.S. ± 1 digit
Measurement accuracy (0 to 50°C) Range 2±0.6% of F.S. ± 1 digit
Measurement accuracy (0 to 50°C) Range 3±0.6% of F.S. ± 1 digit
Measurement accuracy (0 to 50°C) Range 4±0.7% of F.S. ± 1 digit
Measurement accuracy (0 to 50°C) Range 5±0.9% of F.S. ± 1 digit
Control input2 (Parameters are used to switch between the KL input, peak/bottom hold control input, and 0-point adjustment input.)
Control output2 transistor (NPN open-collector) outputs
Setting dataRecorded to the EEPROM (rewritable 1,000,000 times)
Other functionsHold (peak and bottom), 0-point adjustment, comparator output, filter setting (LPF and HPF), time average (simple and moving), scaling setting, display unit changing, lock
External calibration input signal number of inputs2
Maximum input voltageDC26.4V
Input rated voltageDC24V 5.3mA
Minimum ON voltage19V
Maximum OFF current1.5mA
Common groundYES
Output voltage2 outputs (DC1A max., rated output: +24VDC)

Lựa chọn PLC phù hợp với Module keyence

SKUMô tả
CPU
KV-X500CPU unit
KV-8000CPU unit
KV-7500CPU unit with built-in EtherNet/IP® port
KV-7300CPU unit with built-in serial port
KV-5500CPU unit with built-in EtherNet/IP® port
KV-5000CPU unit with built-in Ethernet port
KV-3000CPU unit with built-in serial port
KV-1000CPU unit with built-in serial port
KV-700CPU unit with built-in serial port
I/O unit
KV-B16RA16-point Screw Terminal Block, Relay Output
KV-B16RC16-point Screw Terminal Block, Relay Output
KV-B16TA16-point Screw Terminal Block, Transistor (Sink)
KV-B16TC16-point Screw Terminal Block, Transistor (Sink)
KV-B16TCP16-point Screw Terminal Block, Transistor (Source)
KV-B16TD16-point Screw Terminal Block, MOSFET (Sink) with Overcurrent Protection
KV-B16XA16-point Screw Terminal Block
KV-B16XC16-point Screw Terminal Block
KV-B8RC8-point Screw Terminal Block, Relay Output (Independent Common)
KV-B8XTD8-point/8-point Screw Terminal Block, MOSFET (Sink), with Overcurrent Protection
KV-C16XTD16-point/16-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32TA32-point Connector Transistor (Sink)
KV-C32TC32-point Connector Transistor (Sink)
KV-C32TCP32-point Connector Transistor (Source)
KV-C32TD32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C32XA32-point Connector
KV-C32XC32-point Connector
KV-C32XTD32-point/32-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64TA64-point Connector Transistor (Sink)
KV-C64TC64-point Connector Transistor (Sink)
KV-C64TCP64-point Connector Transistor (Source)
KV-C64TD64-point Connector MOSFET (Sink) with Overcurrent Protection
KV-C64XA64-point Connector
KV-C64XB64-point Connector, with All Terminals Supporting 2-wire Sensors
KV-C64XC64-point Connector
KV-SIR32XTHigh speed I/O unit
I/O unit/Remote I/O unit
KV-N16ERExpansion output unit, output 16 points, relay output, screw terminal block
KV-N16ETExpansion output unit 16 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N16ETPExpansion output unit 16-output Transistor (source) output Screw terminal block
KV-N16EXExpansion unit, Input, 16 points, 5/24 VDC switchable, screw terminal block
KV-N8ERExpansion output unit, output 8 points, relay output, screw terminal block
KV-N8ETExpansion output unit 8 Outputs Transistor (Sink) Output Screw Terminal Block,
KV-N8ETPExpansion output unit 8-output Transistor (source) output Screw terminal block
KV-N8EXExpansion Input Unit DC Input 8 Points Type Screw Terminal Block
KV-N8EXRExpansion I/O Unit 16 Points Type Screw Terminal Block, Input(8 Points) relay output(8 Points)
KV-N8EXTExpansion I/O Unit Screw Terminal Block, Screw Terminal Block, Input(8 Points) Transistor (sink)(8 Points)
KV-NC16ETExpansion Output Unit 16-output Transistor (Sink) connector type
KV-NC16ETEExpansion output unit 16 outputs transistor (sink) output European terminal block
KV-NC16ETPExpansion output unit 16-output Transistor (source) output Connector type
KV-NC16ETPEExpansion output unit 16 outputs transistor (source) output European terminal block
KV-NC16EXExpansion Input Unit 16-input switching 5V/24V DC connector type
KV-NC16EXEExpansion input unit input 16 points European terminal block
KV-NC16EXTExpansion I/O unit 32-point connector type 16-input, 16-output (transistor)
KV-NC32ETExpansion Output Unit 32-output Transistor (Sink) connector type
KV-NC32ETPExpansion output unit 32-output Transistor (source) output Connector type
KV-NC32EXExpansion Input Unit 32-input switching 5V/24V DC connector type
KV-NC32EXTExpansion I/O unit 32-input 32-output Transistor (sink) output Connector type
KV-NC8ERExpansion Output Unit 8-output Relay connector type
Analog/Temperature unit
KV-AD40A/D Conversion Unit, 4 Analog Input Channels
KV-AD40GHigh-precision A/D Conversion Unit, 4 Analog Input Channels
KV-AD40VA/D Conversion Unit, 4 Analog Input Channels
KV-AM40VA/D D/A Conversion Unit, 2 Analog Input Channels + 2 Analog Output Channels
KV-DA40D/A Conversion Unit, 4 Analog Output Channels
KV-DA40VD/A Conversion Unit, 4 Analog Output Channels
KV-SAD04High-speed analogue input unit
KV-SDA04High-speed analogue output unit
KV-TF40PID Temperature Adjustment Unit (Multi-input 4-channel)
KV-TP40Temperature Analog Multi-input Unit (Multi-input 4-channel)
Analog/Temperature unit/Remote I/O unit
KV-N3AMAnalog I/O Unit, voltage and current Input 2ch, voltage and current Output 1ch
KV-NC2DAD/A conversion unit (2 points)
KV-NC4ADA/D Conversion Unit 4-point type
KV-NC4TPTemperature 4-input unit
Remote I/O unit
KL-16BR16-point Screw Terminal Block, Relay Output
KL-16BT16-point Screw Terminal Block, Transistor (Sink)
KL-16BX16-point Screw Terminal Block
KL-16CT16-point Connector Transistor (Sink)
KL-16CX16-point Connector
KL-2DAD/A Conversion Unit, 2 Analog Output Channels
KL-2TFPID Temperature Adjustment Unit (2-channel)
KL-32CT32-point Connector Transistor (Sink)
KL-32CX32-point Connector
KL-4ADA/D Conversion Unit, 4 Analog Input Channels
KL-8BLR8-point Screw Terminal Block, Relay Output with Repeater Function
KL-8BLT8-point Screw Terminal Block, Transistor (Sink) Output, with Repeater Function
KL-8BLX8-point Screw Terminal Block with Repeater Function
KL-8BXR8 Input + 8 Relay Output Screw Terminal Block
KL-8BXT8 Input + 8 Transistor (Sink) Output Screw Terminal Block
KL-B1Joint Cable Adapter
KL-DC1ADC Current Input Unit
KL-DC1VDC Voltage Input Unit
KL-LC1Load Cell Measurement Unit
KL-N20VKL Master Unit
KL-T1T-shaped Branch Unit
KL-WH1Power Measurement Unit
KV-EP02EtherNet/IP® Compatible Communication Unit
KV-RC16BR16-point Screw Terminal Block, Relay Output, with Repeater Function
KV-RC16BT16-point Screw Terminal Block, Transistor Output, with Repeater Function
KV-RC16BX16-point Screw Terminal Block Input, with Repeater Function
KV-RC16BXT16-input + 16-output Screw Terminal Block, Transistor Output
KV-RC32BT32-point Screw Terminal Block, Transistor Output
KV-RC32BX32-point Screw Terminal Block Input
KV-RC8BXR8-input + 8-output Screw Terminal Block, Relay Output, with Repeater Function
KV-RC8BXT8-input + 8-output Screw Terminal Block, Transistor Output, with Repeater Function
Positioning/Motion unit
KV-H20G2-axis Pulse Train (Linear and Circular Interpolation and Synchronous Operation Possible) with Built-in 2-channel High-speed Counter
KV-H20S2-axis Pulse Train (Linear Interpolation Possible)
KV-H40S4-axis Pulse Train (Linear Interpolation Possible)
KV-MC20V2-axis Pulse Train Positioning Motion Unit
KV-MC40V4-axis Pulse Train Positioning Motion Unit
KV-ML16V16-axis ML 2-compatible Positioning Motion Unit
KV-MX1INC Encoder, 4 Input Channels, 12 Inputs, 12 Outputs, SD Card
KV-SH04PLHigh-Speed Positioning Unit
KV-XH04ML4-Axis Positioning/Motion Unit
KV-XH16ML16-Axis Positioning/Motion Unit
Highspeed counter unit
KV-SC20V2-channel Multi-function High-speed Counter Unit
KV-SSC02High speed counter unit
Information/Network unit
KV-CL20Master/Local Unit
KV-DN20DeviceNet® Unit
KV-EP21VEtherNet/IP® Unit
KV-FL20VFL-net Unit
KV-L20VSerial Communication Unit
KV-L21VSerial Communication Unit
KV-LE20VEthernet Unit
KV-LE21VEthernet Unit
KV-LH20VCommunication Positioning Unit
KV-LM20VHigh-speed Multi-link (Megalink) Unit
KV-LM21VHigh-speed multi-link Unit
KV-XL202Serial communication unit, 2 ports (RS-232C×2)
KV-XL402Serial communication unit, 2 ports (RS-422A/485×2)
KV-XLE02EtherNet unit, 2 ports
Power/Bus connection unit
KV-7000CBus Connection Unit
KV-EB1Extension Unit
KV-N1Conversion unit with connector unit
KV-NC1Conversion unit with terminal block connector
KV-PU1AC Power Supply Unit with Error Output

Thông tin bổ sung

Thương hiệu
Series

Có thể bạn thích…

Khu vực Miền Nam

Call: 03826 777 45 / Chat Zalo

Khu vực Miền Bắc

Call: 0383 167 778 / Chat Zalo

Khu vực Miền Trung

Call: 0388 895 669 / Chat Zalo

Dịch vụ kỹ thuật/Bảo hành

Call: 0348 957 778 / Chat Zalo

Email liên hệ